Basic Water Quality Analyzer

The pH analyzer is specifically designed for a wide range of water quality monitoring and process control applications, providing stable, real-time, and reliable pH measurement results. It is widely used in drinking water, surface water, groundwater, industrial processes, and wastewater treatment. By combining advanced online water quality monitoring functions with the concept of predictive maintenance, the product not only continuously monitors changes in water pH, but also enables real-time sensor status tracking through online diagnostics. This helps identify potential abnormalities or failures at an early stage, reduce sensor maintenance and replacement frequency, and further optimize overall operating costs.

The analyzer adopts a modular water quality sensing design with replaceable electrodes and a standard M12 connector, allowing users to select the appropriate electrode type according to different application requirements. In addition, the dual salt bridge reference electrode design and optional differential electrode configuration help improve measurement accuracy, extend electrode service life, and enhance anti-fouling performance in harsh water quality environments.

The product features an integrated compact housing with a built-in transmitter and sensor, combined with an IP68 rugged submersible anti-corrosion enclosure, allowing direct on-site installation without the need for an additional control box. It also offers ultra-low power consumption, a 1000 N high-tensile Kevlar cable, temperature compensation, surge isolation protection, and built-in memory.

The system supports RS485 digital communication and the standard Modbus RTU protocol, enabling direct connection with PLCs and HMI systems. Through the AQCFG utility software, users can perform data reading, calibration, parameter setting, and fault diagnosis. Overall, it provides users with a pH analyzer solution that combines accuracy, stability, and management efficiency

The ORP Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. The ORP Meter housing in a robust IP68 proof enclosure, 1000 N tensile strength Kevlar reinforced cable, up to 1.2 km digital data transmission, the transmitter is ideally used in water/wastewater industry.

The Temperature Transmitter is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostic capabilities. Housing in a robust IP68 proof enclosure, 1000 N tensile strength Kevlar reinforced cable, up to 1.2 km digital data transmission, the transmitter is ideally used in water/wastewater industry.

Our conductivity analyzers provide reliable and repeatable measurement solutions for laboratory analyzers and online monitors, using intelligent predictive maintenance diagnostic software, and advanced technology water quality analysis solutions. Can be used in harsh application environments, maintain and control even the most demanding process applications, increase efficiency and reduce operating costs.

Our Total Dissolved Solids Analyzers are used to help industry get an accurate reading of the total dissolved solids level in water. Typically TDS is associated with drinking water and TDS analysis is most widely performed by industrial water treatment plants. IP68 dust proof and waterproof strong case, 1000N high-strength Kevlar cable, communication distance up to 1.2 kilometers, TDS meter and can be directly installed in reservoirs, rivers, tap water and sewage and other environmental water quality analyzers.

Dissolved oxygen analyzers provide continuous monitoring of dissolved oxygen, dissolved carbon dioxide and ozone in pure water treatment, bioreactors or other industrial processes. It helps engineers optimize product yield, maintain quality and reduce maintenance costs. Suitable for a wide range of hygienic applications, dissolved oxygen meter analytical probes provide stable measurements and offer intelligent sensor management technology to simplify handling and maintenance.

The turbidity analyzer is a sophisticated sensor that uses a built-in LED light source to emit a beam of 880nm. After the beam is scattered by suspended solids in the sample, the signal intensity is measured by the detector to measure the turbidity concentration of the sample. Since the LED emits 880nm near-infrared, it will not be affected by the color of the water sample. Its unique feature is that it can measure turbidity from low to high concentrations. Ideal for wastewater, drinking water monitoring, mixed liquor turbidity monitoring, and many more applications that require the use of traditional turbidimeters or turbidity analyzers. Turbidity sensors can be equipped with a self-cleaning device that sprays water or air onto the optical windows to keep them clean, extending sensor maintenance intervals.

Salinity Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. Housing in a robust IP68 proof enclosure, 1000 N tensile strength Kevlar reinforced cable, up to 1.2 km digital data transmission, the transmitter is ideally used in water/wastewater industry.

The suspended solids Analyzer is a sophisticated sensor that uses a built-in LED light source to emit a beam of 880nm. After the beam is scattered by suspended solids in the sample, the signal intensity is measured by the detector to measure the suspended solids concentration of the sample. Since the LED emits 880nm near-infrared, it will not be affected by the color of the water sample. It is unique in that it can measure low to high concentrations of suspended solids. Ideal for wastewater, drinking water monitoring, mixed liquor suspended solids monitoring, and many more applications that require the use of traditional turbidimeters or suspended solids analyzers. Suspended solids sensors can be equipped with a self-cleaning feature that sprays water or air onto the optical windows to keep them clean and extend sensor maintenance intervals.

The color analyzer utilizes optical technology and colorimetric measurement principles to quantitatively assess the chromaticity and related parameters of a sample. It offers highly accurate measurement capabilities, enabling rapid and precise analysis of an object's color characteristics. These parameters provide a comprehensive description of color properties, helping users better understand the color features of materials. The instrument delivers results in a short period, making it ideal for in-line inspection and quality control on production lines, thereby saving time and improving efficiency. The color analyzer is widely used across various industries and applications, including coatings, paints, textiles, plastics, food, cosmetics, printing, and automotive manufacturing. It enables precise evaluation and control of product color and quality, ensuring consistency and aesthetic appeal. With its simple operation and user-friendly interface, the device allows users to easily perform measurements and data analysis. It can also be paired with a data logger for data storage and export, facilitating efficient data management and report generation.

Our Transparency Analyzer monitoring system utilizes the high penetration capability of infrared light and its advantage in reducing scattering interference. Based on the principle of absorbance measurement, the analyzer detects changes in light absorption in water. By applying the correlation between turbidity and transparency, it accurately calculates the water transparency level.

The Transparency Meter transmits monitoring data directly through an RS485 communication interface, providing a simple, reliable, and cost-effective solution. It also supports remote status display, calibration, configuration, and fault diagnostics, enabling convenient integration into automated monitoring systems.

Featuring a robust IP68-rated dustproof and waterproof enclosure and a 1000 N high-strength Kevlar-reinforced cable, the system ensures durable and stable operation even in harsh environments. With a digital communication distance of up to 1.2 km, the analyzer can be directly deployed in reservoirs, rivers, drinking water facilities, and wastewater monitoring applications.

The Rhodamine Analyzer is specifically designed for water tracing and flow tracking applications, capable of accurately measuring the concentration of Rhodamine WT dye in water. It is an ideal tool for hydraulic engineering, source tracking, pollution source investigation, and river dispersion studies. Equipped with high-sensitivity fluorescence sensing technology, the analyzer enables continuous monitoring even at ultra-low concentrations, ensuring the tracer is reliably detected in the environment and precisely analyzed for transport pathways and dispersion dynamics. With in-situ real-time monitoring capability, the analyzer features an IP68 submersible design and ultra-low power consumption, making it well-suited for deployment in remote or power-limited locations. The built-in digital communication interface (RS-485/Modbus RTU) allows seamless integration into SCADA or remote data acquisition systems, supporting real-time data transmission and long-term trend analysis. It also includes automatic temperature compensation and on-site calibration functionality, enhancing operational flexibility and data reliability.